FSTO Turbine Oil Varnish Removal Systems Specifications

FSTO Turbine Oil Varnish Removal Systems

FSTO is the complete oil conditioning solution for turbine and compressor lube oil. FSTO treats both soluble and insoluble forms of oxidation by-products to remove and prevent varnish deposits and deliver guaranteed results.

Utilizing ICB technology, FSTO removes the soluble varnish feedstock, acids and protects the anti-oxidant additive package while VTM high efficiency post filter removes insoluble by-products and will deliver unimaginably low ISO cleanliness codes so you can use your clean, in-service oil longer than ever before.

Overview
Specs

Dimensions

Height

72” (183 cm)

Length

47.5” (121 cm)

Width

31.5” (80 cm)

Weight

585 lbs (265 kg)

Dimensions are approximations taken from base model and will vary according to options chosen.

Spill retention pan standard size. Consult factory for custom pan sizing.

Connections

Inlet

1” FNPT with ball valve

Outlet

1” FNPT with ball valve

max reservoir size

FSTO05

600 gal (2,271 liters)

FSTO1

1,200 gal (4,542 liters)

FSTO2

2,500 gal (9463 liters)

FSTO4

5,000 gal (18,927 liters)

element configuration

Pre-filter

HP107L18-VTM710-C-V

ICB

FSTO05: ICB600504-V

FSTO1: ICB600504-V x 2

FSTO2: ICB600524 -V

FSTO4: ICB600524-V x 2

seals

Fluorocarbon + silicone

operating temperature

Fluid Temperature

86°F to 176°F

(30°C to 80°C)

Ambient Temperature

-4°F to 104°F

(-20C to 40C)

Materials of Construction

Housings

Carbon steel with industrial coating

Tray

Carbon steel with industrial coating

Electric Motor

TEFC, 56-145 frame

0.5 hp, 1450-1750 RPM

Motor Starter

MSP (motor starter/protector) in an IP65, aluminum enclosure with short circuit and overload protection.

Pump

Cast iron, positive displacement gear pump with internal relief. Maximum pressure on pump inlet 15 psi (1 bar). Consult factory for higher pressures.

Pump Bypass

Full bypass at 150 psi (10 bar)

Pneumatic Option Air Consumption

~40 cfm @ 80 psi³

Air consumption values are estimated maximums and will vary with regulator setting.

Media Description

VTM

β3[C] ≥ 4000 particulate, insoluble oxidation by-product and water removal media.

ICB®

ICB^® Ion-Exchange resin media for molecular removal of acids, varnish deposits, soluble oxidation by-products and dissolved metal ions from mineral based turbine oil.

Fluid Compatibility

Petroleum and mineral based fluids only (standard). For phosphate ester and other specified synthetic fluids, see FSA (page 108) or contact factory.

Hazardous Environment Options

Select pneumatic powered unit (Power Option 00) or explosion proof NEC Article 501, Class 1, Division 1, Group C+D. Call for IEC, Atex or other requirements.