FSLD High Viscosity Dual Filter Skids

A dedicated contamination solution for off-line conditioning and bulk oil handling. Dual housings allow flexibility in using staged element ratings to achieve remarkably clean fluids and hit target ISO Codes in fewer passes, all while extending filter element and oil life.

Ideal for conditioning reclaimed fluids or fluids with high dirt load.

Overview
Specs

Dimensions

Height

55” (139 cm)

Length

48” (121 cm)

Width

32” (81 cm)

Weight

484 lbs (219 kg)

Dimensions are approximations taken from base model and will vary according to options chosen.

Connections

Inlet with 3-Way Valve

FSLD05-FSLD10: 1” FNPT

FSLD20-FSLD30: 1.5” FNPT

Outlet

FSLD05-FSLD10: 1” FNPT

FSLD20-FSLD30: 1.25” FNPT

Operating Temperature

Fluid Temperature

30°F to 225°F

(0°C to 105°C)

Ambient Temperature

-4°F to 104°F

(-20C to 40C)

materials of Construction

Housing

Carbon steel with industrial coating

Tray

Carbon steel with industrial coating

Electric Motor

TEFC, 56-215 frame

1-5 hp, 1450-1750 RPM

Motor Starter

MSP (motor starter/protector) in an IP65, aluminum enclosure with short circuit and overload protection.

Pump

Cast iron, positive displacement gear pump with internal relief. Maximum pressure on pump inlet 15 psi (1 bar). Consult factory for higher pressures.

Pump Bypass

Full bypass at 150 psi (10 bar)

10 GPM pump is rated for intermittent duty only at pressures above 100 psi. Continual operation with dual clogged filters resulting in operating pressures over 100 psi will reduce pump life and/or cause premature pump failure.

Pneumatic Option Air Consumption

~40 cfm @ 80 psi

Air consumption values are estimated maximums and will vary with regulator setting.

Media Description

A

G8 Dualglass high performance media combined with water removal scrim. βx[C] ≥ 4000

M

G8 Dualglass, our latest generation of DFE rated, high performance glass media for all hydraulic & lubrication fluids. βx[C] ≥ 4000

VTM

β3[C] ≥ 4000 particulate, insoluble oxidation by-product and water removal media

W

Stainless steel wire mesh media βx[C] ≥ 2 (βx ≥ 2)

Replacement Elements

Filter Sizing Guidelines

Filter assembly clean element ΔP after actual viscosity correction should not exceed 10% of filter assembly bypass setting. See filter assembly sizing guidelines & examples. For applications with extreme cold start condition contact Hy-Pro for sizing recommendations.

LF ΔP Factor

Viscosity

2-5000 cSt

When sized and installed appropriately. Contact factory for applications above 800 cSt for sizing requirements.

Fluid Compatibility

Petroleum and mineral based fluids, #2 diesel fuels (standard). For specified synthetics contact factory for compatibility with fluorocarbon seal option. For phosphate ester (P9) or skydrol fluid (S9) compatibility select fluid compatibility from special options.

Hazardous Environment Options

Select pneumatic powered unit (Power Option 00) or explosion proof NEC Article 501, Class 1, Division 1, Group C+D. Call for IEC, Atex or other requirements. If Explosion Proof option (X--) selected, no electrical cord or cord reel will be included.