A fully self-contained mobile solution for bulk oil handling, fluid transfer and reservoir or gearbox conditioning. Ideal for lower viscosity hydraulic oil, lube oil and diesel fuel.
Dimensions are approximations taken from base model and will vary according to options chosen.
Connections
Inlet
FC05-FC5: 1” male JIC (37° flare)
FC10: 1.25” male JIC (37° flare)
FC20: 1.5” male JIC (37° flare)
Hoses
FC05-FC5: 1” x 10 ft (2.4 m)
FC10: 1.25” x 10 ft (2.4 m) suction
1” x 10 ft (2.4 m) discharge
FC20: 1.5” x 10 ft (2.4 m) suction
Outlet
FC05-FC10 1” male JIC (37° flare)
FC20: 1.25” male JIC (37° flare)
Operating Temperature
Fluid Temperature
30°F to 225°F
(0°C to 105°C)
Ambient Temperature
-4°F to 104°F
(-20C to 40C)
ΔP Indicator Trigger
22 psi (1.5 bar). Consult factory for other options.
Filter Assembly Bypass
25 psid (1.7 bard). Consult factory for other options.
Materials of Construction
Frame
Industrial coated steel
Filter Assembly
Aluminum head & canister
Hoses
Reinforced synthetic
Element Bypass Valve
Nylon
Wands
Stainless Steel
Electric Motor
TEFC, 56-215 frame
0.5-3 hp, 1450-1750 RPM
Motor Starter
MSP (motor starter/protector) in an IP65, aluminum enclosure with short circuit and overload protection.
Electric Connection
Voltages 230 V ac and under, single phase: 35’ (11 m) retractable cord reel included. NEMA 5-15 plug installed on Power Option 12.
Voltages over 230 V ac: 35’ (11 m) power cord included.
PUmp
Cast iron, positive displacement gear pump with internal relief. Maximum pressure on pump inlet 15 psi (1 bar). Consult factory for higher pressures.
Pump Bypass
Full bypass at 150 psi (10 bar)
10 GPM pump is rated for intermittent duty only at pressures above 100 psi. Continual operation with dual clogged filters resulting in operating pressures over 100 psi will reduce pump lifeand/or cause premature pump failure.
Pneumatic Option Air Consumption
~40 cfm @ 80 psi3
35’ (11 m) retractable air hose included when pneumatic option selected (replaces electric cord reel).
Air consumption values are estimated maximums and will vary with regulator setting.
Some additional information in one line
A
G8 Dualglass high performance media combined with water removal scrim. βx[C] ≥ 4000 (βx ≥ 200)
M
G8 Dualglass, our latest generation of DFE rated, high performance glass media for all hydraulic & lubrication fluids. βx[C] ≥ 4000 (βx ≥ 200)
Filter assembly clean element ΔP after actual viscosity correction should not exceed 10% of filter assembly bypass setting. See filter assembly sizing guidelines & examples. For applications with extreme cold start condition contact Hy-Pro for sizing recommendations.
When sized and installed appropriately. Contact factory for applications above 800 cSt for sizing requirements.
Fluid Compatibility
Petroleum and mineral based fluids, #2 diesel fuels (standard). For specified synthetics contact factory for compatibility with fluorocarbon seal option. For phosphate ester (P9) or skydrol fluid (S9) compatibility select fluid compatibility from special options.
Hazardous Environment Options
Select pneumatic powered unit (Power Option 00) or explosion proof NEC Article 501, Class 1, Division 1, Group C+D. Call for IEC, Atex or other requirements. If Explosion Proof option (X--) selected, no electrical cord will be included.
